Removing An ABF U-Pack Moving Bulkhead

CAUTION: Use caution when removing the bulkhead, as items may have shifted against the bulkhead during transit.

	Step 1: Remove any locks from the black handles. HOLD DOWN THE HANDLE FIRMLY while pressing the silver release button. Slowly release the handle to relieve pressure. Repeat for bottom load bar.
	Step 1 Continued: REMEMBER TO KEEP A VERY FIRM GRIP ON THE HANDLE AT ALL TIMES TO PREVENT IT FROM POPPING OPEN AND CAUSING INJURY
	Step 2: Remove the locking pin from the top and bottom load bar.
	Step 3: Lift up on the load bars to remove them from the slots on the vertical trailer post. THE BULKHEAD IS NOW LOOSE.
	Step 4: Slide the bulkhead away from your U-PackŪ shipment and then slide the load bars apart. Safely move each bulkhead aside and begin unloading.

Lockable (round bars) Setup Instructions

[Top]